Polyurethane scavengers are the most common cleaning equipment purchased by the unit using the belt conveyor.Polyurethane sweeper this cleaning equipment, can bring benefits to the manufacturer.In short: it is beneficial to clean the attachment of conveyor belt, effectively protect the conveyor belt equipment, and thus reduce the maintenance cost.There is a problem sometimes encountered by users: how to improve the cleaning efficiency of polyurethane sweeper?

As the manufacturer of belt sweeper, changyi offers the following Suggestions to the user: 1. In order to further improve the cleaning effect of polyurethane sweeper.It is recommended to install multiple sets of sweeper to form a complete conveyor belt cleaning system. Because of the different sweeper, the installation position is different, the function is also different: the head sweeper is installed on the head roller, can clean most of the material stuck on the belt.Install two sweepers to clean up the fine material left behind the header sweeper.Install empty segment sweeper to clean belt non-working face.Such a complete belt cleaning system can effectively clean adhesive. 2. If the mud scraper has been used for a long time, which has affected the normal play of the cleaning effect, the mud scraper should be replaced in time to ensure the play of the cleaning effect. 3. Regular maintenance improves the cleaning effect: the sweeper needs regular maintenance. 4. Maintain normal contact pressure: when using the unit to install the sweeper, make sure that the polyurethane sweeper is under normal working pressure, that is, maintain normal contact pressure between the sweeper and the belt.

As the manufacturer of belt sweeper, changyi offers the following Suggestions to the user: 1. In order to further improve the cleaning effect of polyurethane sweeper.It is recommended to install multiple sets of sweeper to form a complete conveyor belt cleaning system. Because of the different sweeper, the installation position is different, the function is also different: the head sweeper is installed on the head roller, can clean most of the material stuck on the belt.Install two sweepers to clean up the fine material left behind the header sweeper.Install empty segment sweeper to clean belt non-working face.Such a complete belt cleaning system can effectively clean adhesive. 2. If the mud scraper has been used for a long time, which has affected the normal play of the cleaning effect, the mud scraper should be replaced in time to ensure the play of the cleaning effect. 3. Regular maintenance improves the cleaning effect: the sweeper needs regular maintenance. 4. Maintain normal contact pressure: when using the unit to install the sweeper, make sure that the polyurethane sweeper is under normal working pressure, that is, maintain normal contact pressure between the sweeper and the belt.      For more information about polyurethane mud scraper, please visit the changyi new materials website at http://www.cynew.com or call 400-8339-008/139 2577 5994/137 9485 0235