The Changyi H-belt cleaner is installed near the head wheel and is near the tangent point at a 15 degree angle to the center line of the head wheel. It is mainly used to remove the adhesive material near the top of the head wheel, so it is also called the head sweeper. Changyitoudao sweeper scraper adopts improved polymer polyurethane material, high wear resistance, temperature resistance, chemical resistance, not easy to break, hydrolysis resistance, etc. The scraper has polyurethane overall scraper, such as CY480, CY580, CY760, CY800, etc. Body scrapers, such as CY001, CY002, CY003, CY004, etc., the width of the scraper is about 100mm or 200mm, and can be assembled into a 450-2000mm length cleaner according to the customer's belt width to meet the diversified needs of customers.
The Changyi P-belt cleaner is installed at the smooth working surface near the head wheel. It is mainly used to remove the adhesive material near the bottom of the head wheel. Therefore, we also call it the secondary cleaner. Usually the secondary cleaner can be divided into two polyurethane cleaners and alloy cleaners.
Changyi Erdao Polyurethane Scraper is also divided into integral and split polyurethane scrapers. Since the installation position of the second cleaner is the flat surface of the return belt below the head roller, the cutter head of the second scraper is flat, the structure of the second cleaner is simple, the scraper is easy to replace, and the adjustment can be assembled into 400. Sweepers of ~1200mm can be adjusted according to the width of the belt when used in the field.
Advantages of alloy cleaner: 1. The alloy cleaner head adopts high wear-resistant special hard alloy, which has better comprehensive mechanical properties and prolongs the service life of the product. 2. The bottom of the alloy scraper is polyurethane material, and the polyurethane itself. It has certain elastic properties, which automatically adjusts the contact pressure between the cleaner scraper and the conveyor belt. The buffering effect of the polyurethane can also ensure that the force of the scraper and the running belt is within a certain range, so that the scraper is The work is clean and does not damage the tape. 3, because the alloy surface is smooth, non-bonding characteristics, so it has a better cleaning effect, where the moisture content of the adherent is more than 5%, can use two-way alloy cleaner; 4, alloy scraper has interchangeable and can Tonality, installation, adjustment, easy maintenance, small maintenance work.
The development and start-up of the sweeper in China is relatively late. At the end of 2014, Changyi engineers visited some industrial and mining enterprises in Hunan and found that many places are still adhering to the cleaning and transportation. This wastes manpower and is prone to work accidents. There are also many companies that intercept some of the abandoned belts for temporary cleaning facilities. This method is feasible, but it is easy to damage the belt and reduce the service life of the belt. With the development of the industrial conveyor belt market, many companies have put forward higher requirements for the maintenance of equipment, so the demand for the cleaner has been developed accordingly. Changyi New Materials is committed to the research and development and application of wear-resistant, temperature-resistant and chemical-resistant materials. Since 2009, it has been crouching in the industry of cleaners for nearly 10 years. In the e-commerce era, Changyi does not need inferior materials and low prices. Going to the market, but insisting on the quality of the products, because we firmly believe that only good quality can usher in a good reputation, only good quality can create greater economic value.