The head belt sweeper is the first stage of the conveyor belt cleaning system.The sweeper scraper is installed on the front part of the belt roller at an inclined Angle and with appropriate contact pressure.The head sweeper is in close contact with the belt to remove the attachment of the belt.If the contact pressure is too high, it will damage the conveyor belt, joints and sweeper.
Usually, the head sweeper is mounted on the surface of the upper roller, just below the track where the conveyor belt carries the material.
How to choose the right header sweeper?Determine the bandwidth width of the conveyor belt, the diameter of the head roller, the speed of the belt, the temperature of the use of these data.
To be specific: after determining the specifications of the conveyor belt, the following steps should be taken:
1. Select the appropriate type of header sweeper according to the bandwidth of the conveyor belt and the diameter of the roller.
2. Check the speed range of the belt.
3. Select the appropriate sweeper scraper according to the material characteristics and applicable temperature.Selecting the appropriate scraper of the sweeper is conducive to giving play to the cleaning effect of the sweeper.
Changyi company is the best in this field.Over the years, changyi company for countless customers to solve the problem of belt adhesive.The quality of changyi road sweeper has been recognized and favored by users.
For more information about polyurethane mud scraper, please visit the changyi new materials website at http://www.cynew.com or call 400-8339-008/139 2577 5994/137 9485 0235
