Belt buffer presses are suitable for conveyor belts.Material falling impact belt, belt force sink impact slow punch, slow punch through the core components high elastic cushion effectively absorb shock, reduce the wear of belt and the buffer strip, effectively prolong the service life of the belt and buffer strip, at the same time due to the slow punch scientific and reasonable design, effectively reduce the probability of the belt longitudinal tearing, effectively reduce the belt maintenance costs, slow punch shock resistance is much higher than the buffer roller replacement frequency low service life (3-5 years) is relatively buffer roller using low maintenance costs.
The effective use of belt buffer must have the following characteristics: 1. The contact between the buffer strip and the surface of the conveyor belt effectively prevents damage to the conveyor belt. 2. The conveyor belt bears a uniform force at the blanking mouth, which greatly reduces the daily repair and maintenance costs. 3. Effectively eliminate spatter and leakage of materials caused by uneven stress on the conveyor belt. 4. The smooth surface of UHMWPE reduces the friction of conveyor belt. 5. The curved surface design of the polyethylene layer ensures smooth and smooth operation of the conveyor belt. 6. Super elastic special rubber layer can absorb material impact force to a greater extent. 7. All parts of the buffer strip are connected tightly and firmly by the hot curing process. 8. The design of the underlying steel structure makes it easy to disassemble and assemble.
